Flow Rate:850 600 350 L/min

Pressure:5 6 8 Mpa

Power Type:Available option driven by diesel engine,electric motor,hydraulic motor

>> Application

BW850-5 mud pumps horizontal, two-cylinder, double-acting, drive with built-in gear reducer and are designed to discharge washing liquid (water, mud) in the hole in exploration and stratigraphic drilling for oil and gas. Mud pumps are also widely used in the food, chemical and construction industries for pumping various non-aggressive liquids.

Flow Rate:1500 1080 L/min

Pressure: 8 12 Mpa

Power Type:Available option driven by diesel engine,electric motor,hydraulic motor

>> Application

BW1500-12 mud pump used for various engineering drilling rigs, geological drilling rig when drilling would like to nip the circulating fluid (mud or water), which is equipped with drilling rigs to drill holes with mud. During drilling mud pump pumps slurry to the hole to provide coat to the wall, to lubricate the drilling tools and to carry the rock debris up to the ground.

Hole Diameter:75-130 mm

Hole depth: 20 m

Drilling Method:Air Drilling & Mud Drilling

>> Application

The rock blasting drilling rig DM100A/B is high powered with easy operation system. 

Hold Diameter: 75 mm

Drilling Depth: 600 m

Drilling Method: Spindle core drilling rig

>> Application

XY-600 type drill based on the ordinary drill increase drill shift chute, which can realize quick change tool to improve the work efficiency to reduce Labour intensity.

The machine is used for the high-speed drilling machine is suitable for the exploration, geophysical exploration, road and building exploration and blasting hole drilling engineering, etc and it can be selected according to the underlying different alloy, diamond, compact drill for drilling, etc.

Rod size: 42-89 mm

Drilling Depth: 1200 to 430 m    

Drilling Method: Spindle core drilling rig

>> Application

The XY-42A spindle type core drilling rig can be applied to coring drilling by using tungsten-carbide-tipped bit and diamond bit. It is also called surface core drill rig in general place. It can be also used to engineering geological exploration, hydro-geological, water well drilling and big foundation hole as well as basic piling hole.

Hold Diameter: 42-89 mm

Drilling Depth: 1400 to 300 m    

Drilling Method: Spindle core drilling rig

>> Application

XY-44A Core Drilling Rig is a core drilling equipment based on diamond and carbide drilling. It is mainly used in geology, metallurgy, coal, hydrology, engineering and other industries. It can also be used in engineering geological exploration, shallow oil and natural gas exploration , Mine tunnel ventilation, drainage, hydrological wells drilling and large diameter foundation pile construction.

Hold Diameter: 75 mm

Drilling Depth: 200 m

Drilling Method: Spindle core drilling rig

>> Application

XY-200 type drill based on the ordinary drill increase drill shift chute, which can realize quick change tool to improve the work efficiency to reduce Labour intensity.

The machine is used for the high-speed drilling machine is suitable for the exploration, geophysical exploration, road and building exploration and blasting hole drilling engineering, etc and it can be selected according to the underlying different alloy, diamond, compact drill for drilling, etc.

I.D of Spindle : 68 mm

Drilling Depth: 700 to 1000 m    

Drilling Method: Spindle core drilling rig

>> Application

The XY-4T core drill rig, integrated rig with tower into one unit, consists of XY-4 drill rig and mast-type drill tower, with the function of hydraulic lifting and lowering of tower. The rig is simple in structure, reasonable in design, light in weight, easy to operate; it is in a wide range adjusting angle. It is especially suitable for drilling of

hole with great slope angle.

The tower body of XY-4T Drill Rig is used as lifting drill tools for drilling vertical as well as inclined holes. The range of adjusting angels (in clock-wise direction) for drilling inclined holes is 0°-90°.