Flow Rate:160 107 67 44 L/min

Pressure:2.5 4 6.5 10 Mpa

Power Type:Available option driven by diesel engine,electric motor,hydraulic motor

>> Application

It is applied to geological and engineering prospecting such as the railway, the water conservancy, the met-allurgy, the build and the geology etc industry whose hole deep is within 1000m. Also it can be used to deliver water to high mountains or in the execution domain of middle and low pressure grouting and non excavating matching. This pump ha advantages such as small cubage, light mass, long life, simple operation and reliable per-formance, etc

Flow Rate:200 125 L/min

Pressure: 4 6 Mpa

Power Type:Available option driven by diesel engine,electric motor,hydraulic motor

>> Application

BW200 Mud Pumps is equipped with drilling rigs to drill holes with mud. During drilling mud pump pumps slurry to the hole to provide coat to the wall, to lubricate the drilling tools and to carry the rock debris up to the ground.

BW200 mud pump are mainly used for irrigation agricultural machinery.the main characteristic is the high pressure, lift much, less engergy consumption, easy operation, high quality and duarable, easy to move, especially for mountain terraces of irrigation.

Flow Rate:320 230 180 165 118 L/min

Pressure:4 5 6 8 9 Mpa

Power Type:Available option driven by diesel engine,electric motor,hydraulic motor

>> Application

BW320 mud pump are mainly used for irrigation agricultural machinery.the main characteristic is the high pressure, lift much, less energy consumption, easy operation, high quality and durable, easy to move, especially for mountain terraces of irrigation.

BW320 type mud pump is a horizontal triplex single acting reciprocating piston pump, which has two bore and fourth gear speed. Displacement and hole depth can be adjusted according to the application, the deepest can be adjusted to the application, the deepest can be used with 1800meters drilling rig, it also can be used cement perfusion.

Flow Rate: 450 350 340 240 172 L/min

Pressure:1.2 2 3 4 5 Mpa

Power Type:Available option driven by diesel engine,electric motor,hydraulic motor

>> Application

The BW450 is horizontal tri-cylinder dual role penthouse Detroit piston pump. It is mainly used to supply flushing fluid to the drilling well in core drilling or hole drilling. The pump can discharge not only clear water, but also thick mud. And for the specialty of small external dimension, light weight, the pump is suitable for transportation in mountain.

BW450/5 type mud pump is a horizontal triplex single acting reciprocating piston pump, which has three bore and four gear speed. Displacement and hole depth can be adjusted according to the application, the deepest can be adjusted to the application,the deepest can be used with 1800meters drilling rig,it also can be used cement perfusion.

Flow Rate:850 600 350 L/min

Pressure:5 6 8 Mpa

Power Type:Available option driven by diesel engine,electric motor,hydraulic motor

>> Application

BW850-5 mud pumps horizontal, two-cylinder, double-acting, drive with built-in gear reducer and are designed to discharge washing liquid (water, mud) in the hole in exploration and stratigraphic drilling for oil and gas. Mud pumps are also widely used in the food, chemical and construction industries for pumping various non-aggressive liquids.

Flow Rate:1500 1080 L/min

Pressure: 8 12 Mpa

Power Type:Available option driven by diesel engine,electric motor,hydraulic motor

>> Application

BW1500-12 mud pump used for various engineering drilling rigs, geological drilling rig when drilling would like to nip the circulating fluid (mud or water), which is equipped with drilling rigs to drill holes with mud. During drilling mud pump pumps slurry to the hole to provide coat to the wall, to lubricate the drilling tools and to carry the rock debris up to the ground.

Model:CL351

Max. Drilling depth:30m

Drilling Method:Air Drilling & DTH Drilling

>> Introduction

CL351 crawler pneumatic DTH drilling rig  powered by air compressor,the drilling rig is equipped with a high power pneumatic motor, the heavy-duty hydraulic drill arm and the main parts are all imported from famous international brands, which guarantee the reliable quality of the drill, especially realize much less energy consumption of rolling fraction than that of sliding fraction and make the wear of sliding framework be lower.

Hole Diameter:75-130 mm

Hole depth: 20 m

Drilling Method:Air Drilling & Mud Drilling

>> Application

The rock blasting drilling rig DM100A/B is high powered with easy operation system.