Flow Rate: 450 350 340 240 172 L/min

Pressure:1.2 2 3 4 5 Mpa

Power Type:Available option driven by diesel engine,electric motor,hydraulic motor

>> Application

The BW450 is horizontal tri-cylinder dual role penthouse Detroit piston pump. It is mainly used to supply flushing fluid to the drilling well in core drilling or hole drilling. The pump can discharge not only clear water, but also thick mud. And for the specialty of small external dimension, light weight, the pump is suitable for transportation in mountain.

BW450/5 type mud pump is a horizontal triplex single acting reciprocating piston pump, which has three bore and four gear speed. Displacement and hole depth can be adjusted according to the application, the deepest can be adjusted to the application,the deepest can be used with 1800meters drilling rig,it also can be used cement perfusion.

Flow Rate:850 600 L/min

Pressure:2 3 Mpa

Power Type:Available option driven by diesel engine,electric motor,hydraulic motor

>> Application

BW850-2 Mud Pumps is equipped with drilling rigs to drill holes with mud. During drilling mud pump pumps slurry to the hole to provide coat to the wall, to lubricate the drilling tools and to carry the rock debris up to the ground.

BW850-2 mud pump are mainly used for irrigation agricultural machinery.the main characteristic is the high pressure,lift much,less energy consumption,easy operation,high quality and durable,easy to move,especially for mountain terraces of irrigation.

Flow Rate:1500 1080 L/min

Pressure: 8 12 Mpa

Power Type:Available option driven by diesel engine,electric motor,hydraulic motor

>> Application

BW1500-12 mud pump used for various engineering drilling rigs, geological drilling rig when drilling would like to nip the circulating fluid (mud or water), which is equipped with drilling rigs to drill holes with mud. During drilling mud pump pumps slurry to the hole to provide coat to the wall, to lubricate the drilling tools and to carry the rock debris up to the ground.

Model:CL351

Max. Drilling depth:30m

Drilling Method:Air Drilling & DTH Drilling

>> Introduction

CL351 crawler pneumatic DTH drilling rig  powered by air compressor,the drilling rig is equipped with a high power pneumatic motor, the heavy-duty hydraulic drill arm and the main parts are all imported from famous international brands, which guarantee the reliable quality of the drill, especially realize much less energy consumption of rolling fraction than that of sliding fraction and make the wear of sliding framework be lower.

Hole Diameter:75-130 mm

Hole depth: 20 m

Drilling Method:Air Drilling & Mud Drilling

>> Application

The rock blasting drilling rig DM100A/B is high powered with easy operation system. 

Model:DRC300 

Max. Drilling depth:25m

Drilling Method:Air Drilling & Top hammer Drilling

>> Introduction

DRC300 crawler pneumatic top hammer drilling rig powered by air compressor, the Top hammer drilling rig is equipped with a high power pneumatic rock drifter, the heavy-duty drill arm and the main parts of this rotary drill rig are all imported from famous international brands, which guarantee the reliable quality of the drifter rock drilling rig, especially realize much less energy consumption of rolling fraction than that of sliding fraction and make the wear of sliding framework be lower.

Hold Diameter: 43-89 mm

Drilling Depth: 1800 to 900 m    

Drilling Method: Spindle core drilling rig

>> Application

HXY-5A spindle type core drilling rig usually takes diamond bit or hard tungsten-carbide tipped bit. It is widely applied in the field of geology, metallurgy, coal mine, hydrological and engineering drilling. It is mainly suitable for exploration of metal or non-metal solid mineral ore bed. It can also be used in the exploration of superficial-zone petroleum and natural gas, mines' ventilation and water discharge tunnel drilling as well as large-diameter foundation piling.

Rod size: 42-89 mm

Drilling Depth: 1200 to 430 m    

Drilling Method: Spindle core drilling rig

>> Application

The XY-42A spindle type core drilling rig can be applied to coring drilling by using tungsten-carbide-tipped bit and diamond bit. It is also called surface core drill rig in general place. It can be also used to engineering geological exploration, hydro-geological, water well drilling and big foundation hole as well as basic piling hole.